Products: Poster Display Cases 

 Our poster display cases are available as freestanding versions for single or double sided advertisements and as wall models. Their configuration and design are customized to the customer's desired specifications. For instance, the visible surface can be painted or printed, or be manufactured of polished or brushed metal.

All models are conceived for permantent outdoor use with paper posters. Ventilation systems help condensed water evaporate quickly so that the panel does not fog up.

Our patented poster clamps offer a longer high-quality displayal. Weather-related changes in the paper's form are compensated by automatic tension adjustments so that the posters are smooth and wrinkle-free at all times. Problems with wavy posters are thus a thing of the past.

The energy-optimized backlighting guarantees a brilliant advertising effect for your posters. Light-spreading panels and the arrangement of fluorescent tubes create an even, shadow-free light distribution without glaring strips. To handle the tubes and electricity sparingly, we supply standard idle current compensation, optionally with electronic pre-switching devices. As a further option dusk or time switches are available.

The electrical equipment meets protection category IP 54 (by request protection class 2 with residual current switch) and fulfills VDE and CE standards.

Of course we also thought of the maintenance workers: all models offer a very simple and quick poster replacement.

 Edge Fluter Display Case
with a door entirely out of glass, for inside and outside use, its superflat design makes it suitable for use in passage ways with human traffic.

The casing is hidden by the cover which slightly stands above the edges. The cover and motive appear to be floating

The posters are lit from the sides using fluorescent tube lights and light dispersion. The light dispersion is made possible using a type of acrylic glass which is an especially good conductor of light. Special particles in the cover direct the light out of the cover, lighting the entire poster. This allows an even, and completely shadow and streak-free illumination at a minimal depth of only 45 mm.

.

Maintenance: The poster is held at the top with clamps and can easily be exchanged.
Surface: powder-coated, (color of the passepartout and cassette according to specification)
Design: The casing is made from a bent aluminum cassette, and the front door is made from glass and screen printed passepartout. The door can be opened from the top and is held in place by gas pressure hinges.
Electricity: 6 T5 fluorescent tube lights ( 4 x 28 watt and 2 x 14 watt), electronic control gear unit, 230 V, VDE (Association of German Electricians) tested and CE certified
Measurements: (Width x Height x Depth) 1310 x 1880 x 45 mm, poster format 4/1

 Poster Display Case "Köln"
high-grade stainless steel display case with glass doors for inside and outside use

Optional Accessories: Front protection bar made from polished stainless steel profiles.
Maintenance: Fully automatic clamping device for quick poster change.
Surface: The visible surfaces are made from polished stainless steel. Design: The casing is made from polished stainless steel sheet-metal and has a galvanized internal steel frame. The front cover is raised and made from one-paned safety glass and has a passe-partout made from ceramic screen printing which has been applied at its back. The glass door does not have a sheet metal frame and is attached to the casing at its side.
Electricity: Four 36 watt fluorescent tube lights.

 Poster Display Case "München"
with two-sided advertising space for inside and outside use

Types: with or without hoop guards
Surface: Visible surfaces can either be powder-coated or made from stainless steel.
Design: Internal base frame is made from extruded aluminum profiles. Inserted steel feet are connected via a welded sole plate. The socket casing has a front guard. The raised, acrylic, light diffuser glass is bent at the top.

The front door is made from molded, stainless steel sheet-metal and is, when open, held in place by gas pressure hinges. The glass pane is made from 5 mm thick, one-paned security glass. A lock is located in the lower middle half and is concealed.
Electricity: Four fluorescent 58 Watt tube lights with control gear of the protection class II. VDE (Association of German Electricians) tested with CE certification.
Measurements: (Width x Height x Depth) 1310 mm x 1880 x 250 mm.

 Poster Case for Wall Mount "TOTAL"

Surface: Powder-coated.
Design: The base frame is made from u-shaped aluminum profiles. The door is made from bent stainless steel sheet metal and is held in place by two gas pressure hinges. The light diffuser cover is made from white acrylic glass (2 mm) and has a latch lock. The light diffuser cover can be clapped open to clean the casing and to exchange the fluorescent tube lights.
Electricity: Five 28 Watt fluorescent tube lights with an electrical control gear. VDE (Association of German Electricians) tested with CE certification.
Measurements: Poster format: 1185 x 1750 mm (City Light or 4/1 format).

 Slide Case "Hannover"
with two-sided advertising space for baggage claim areas at airports.

The guiding rollers allow the slide case to move sideways. The side pieces can be detached, allowing the slide cases to be combined with each other in any which way and allowing for the display of motives of different sizes.

Design: The frame is made from aluminum profiles, the base plate from aluminum sheet steel. The legs are made from round aluminum tubing, placed from above through the casing and welded to it on the inside. The front covers are made out of opaque polyester. The base panel is made a steel profile.
Surface: powder-coated

Electricity: Six 28 watt fluorescent tube lights with electrical control gear units and reflector sheeting between the tubing. The individual slide cases are centrally connected to one another and share a common plug and socket. Each slide case has each separate on/off switch for the illumination.
Measurement: (Height x Width x Depth) 891 x 1239 x 200 mm

 Double-Sided Poster Display Case
with one-legged footing

Maintenance: The poster is held in place at two spots on top and is kept neat and free of folds by two special grippers in the door frame.
Design: The door is made from stainless steel sheet metal and has raised one-paned safety glass which is fixed at the top and is supported by an internal frame. The doors have been designed as "half shells" and act as the casing.
Electricity: Four 58 Watt fluorescent tube lights installed according to VDE (Association of German Electricians) specifications with CE certification.

 Poster Case for Wall Mount
internally illuminated with a raised front door

Maintenance: Magnets secure the poster at the top and at the bottom.
Surface: The visible surfaces are made from polished stainless steel (grain size 280).
Design: Raised light diffuser cover made from acrylic glass. The cover can be opened to change the poster.

Electricity: Four 36 Watt fluorescent tube lights, operated by two electrical control gears. Tested according to VDE (Association of German Electricians) standards with CE certification. In addition, a circuit breaker (6 kVA) and a residual current circuit breaker (30 mA).
Measurements: (Width x Height x Depth) 1310 x 1880 x 165 mm. Poster format: 1185 x 1750 mm (portrait format).

 Poster display case "Smart"

Design: Casing bodies made of core-fortified aluminum profiles, stainless sheet metal door with straight front window made of security glass. Frame made of hot zinc dipped steel profiles. The bottom part of the door has acrylic glass backed laser writing.
Electricity: Five 36 watt neon tubes (one of them for the illumination of the writing).
Measurements: (B x H x D) 1320 x 2915 x 220 mm, poster format 1190 x 1750 mm (4/1)

 Poster display case "DEA"

Design: Frame and side pillars made of hot zinc dipped steel profiles. The stainless sheet metal door with straight front window made of security glass opens to the top.
Electricity: Three 58 watt neon tubes, instattled vertically.
Measurements: (B x H x D) 1380 x 2000 x 220 mm, special poster format 1100 x 1600 mm

 Triangular display case
for attachment to pillars

Design: Casing bodies made of core-fortified aluminum profiles, stainless sheet metal door with convex security glass.
Electricity: 3 x 4 neon tubes, 36 watt
Measurements: (B x H) approx. 1280 x 1870 mm, poster format 1190 x 1750 mm (4/1)

 Poster display case "ARAL"
with one or two-sided advertising surface for indoor and outdoor use

Design: The high-grade steel door is made with domed safety glass and is attached to the casing at its top by two gas pressure hinges. The internal frame as well as the casing are made from aluminum profiles. Steel legs can be inserted to allow the display case to stand on its own.
Electricity: Six 36 watt fluorescent tube lights.
Measurements: (B x H x D) 1390 x 2310 x 180 mm, poster format 1190 x 1750 mm (4/1)


Pictured are sample products. Since we manufacture our products individually, the design, measurements and coloring can be fitted to meet any customer specifications. We are looking forward to fulfilling your expectations.

Fluorescent Signs <
Poster Display Cases
> Waste Disposal Containers
06.03.2006